module Seq:sig..end
Sequences.
A sequence of type 'a Seq.t can be thought of as a delayed list,
that is, a list whose elements are computed only when they are demanded
by a consumer. This allows sequences to be produced and transformed
lazily (one element at a time) rather than eagerly (all elements at
once). This also allows constructing conceptually infinite sequences.
The type 'a Seq.t is defined as a synonym for unit -> 'a Seq.node.
This is a function type: therefore, it is opaque. The consumer can query a sequence in order to request the next element (if there is
one), but cannot otherwise inspect the sequence in any way.
Because it is opaque, the type 'a Seq.t does not reveal whether
a sequence is:
It also does not reveal whether the elements of the sequence are:
It is up to the programmer to keep these distinctions in mind so as to understand the time and space requirements of sequences.
For the sake of simplicity, most of the documentation that follows
is written under the implicit assumption that the sequences at hand
are persistent.
We normally do not point out when or how many times
each function is invoked, because that would be too verbose.
For instance, in the description of map, we write:
"if xs is the sequence x0; x1; ...
then map f xs is the sequence f x0; f x1; ...".
If we wished to be more explicit,
we could point out that the transformation takes place on demand:
that is, the elements of map f xs are computed only when they
are demanded. In other words,
the definition let ys = map f xs terminates immediately and
does not invoke f. The function call f x0 takes place only when the
first element of ys is demanded, via the function call ys().
Furthermore, calling ys() twice causes f x0 to be called twice
as well. If one wishes for f to be applied at most once to each
element of xs, even in scenarios where ys is queried more than once,
then one should use let ys = memoize (map f xs).
As a general rule, the functions that build sequences, such as map,
filter, scan, take, etc., produce sequences whose elements are
computed only on demand. The functions that eagerly consume sequences,
such as is_empty, find, length, iter, fold_left,
etc., are the functions that force computation to take place.
When possible, we recommend using sequences rather than dispensers
(functions of type unit -> 'a option that produce elements upon
demand). Whereas sequences can be persistent or ephemeral, dispensers
are always ephemeral, and are typically more difficult to work with
than sequences. Two conversion functions, Seq.to_dispenser and
Seq.of_dispenser, are provided.
type'at =unit -> 'a node
A sequence xs of type 'a t is a delayed list of elements of
type 'a. Such a sequence is queried by performing a function
application xs(). This function application returns a node,
allowing the caller to determine whether the sequence is empty
or nonempty, and in the latter case, to obtain its head and tail.
type 'a node =
| |
Nil |
| |
Cons of |
A node is either Nil, which means that the sequence is empty,
or Cons (x, xs), which means that x is the first element
of the sequence and that xs is the remainder of the sequence.
The functions in this section consume their argument, a sequence, either partially or completely:
is_empty and uncons consume the sequence down to depth 1.
That is, they demand the first argument of the sequence, if there is one.iter, fold_left, length, etc., consume the sequence all the way to
its end. They terminate only if the sequence is finite.for_all, exists, find, etc. consume the sequence down to a certain
depth, which is a priori unpredictable.Similarly, among the functions that consume two sequences, one can distinguish two groups:
iter2 and fold_left2 consume both sequences all the way
to the end, provided the sequences have the same length.for_all2, exists2, equal, compare consume the sequences down
to a certain depth, which is a priori unpredictable.The functions that consume two sequences can be applied to two sequences of distinct lengths: in that case, the excess elements in the longer sequence are ignored. (It may be the case that one excess element is demanded, even though this element is not used.)
None of the functions in this section is lazy. These functions are consumers: they force some computation to take place.
val is_empty : 'a t -> boolis_empty xs determines whether the sequence xs is empty.
It is recommended that the sequence xs be persistent.
Indeed, is_empty xs demands the head of the sequence xs,
so, if xs is ephemeral, it may be the case that xs cannot
be used any more after this call has taken place.
val uncons : 'a t -> ('a * 'a t) optionIf xs is empty, then uncons xs is None.
If xs is nonempty, then uncons xs is Some (x, ys) where x is the
head of the sequence and ys its tail.
val length : 'a t -> intlength xs is the length of the sequence xs.
The sequence xs must be finite.
val iter : ('a -> unit) -> 'a t -> unititer f xs invokes f x successively
for every element x of the sequence xs,
from left to right.
It terminates only if the sequence xs is finite.
val fold_left : ('a -> 'b -> 'a) -> 'a -> 'b t -> 'afold_left f _ xs invokes f _ x successively
for every element x of the sequence xs,
from left to right.
An accumulator of type 'a is threaded through the calls to f.
It terminates only if the sequence xs is finite.
val iteri : (int -> 'a -> unit) -> 'a t -> unititeri f xs invokes f i x successively
for every element x located at index i in the sequence xs.
It terminates only if the sequence xs is finite.
iteri f xs is equivalent to
iter (fun (i, x) -> f i x) (zip (ints 0) xs).
val fold_lefti : ('b -> int -> 'a -> 'b) -> 'b -> 'a t -> 'bfold_lefti f _ xs invokes f _ i x successively
for every element x located at index i of the sequence xs.
An accumulator of type 'b is threaded through the calls to f.
It terminates only if the sequence xs is finite.
fold_lefti f accu xs is equivalent to
fold_left (fun accu (i, x) -> f accu i x) accu (zip (ints 0) xs).
val for_all : ('a -> bool) -> 'a t -> boolfor_all p xs determines whether all elements x of the sequence xs
satisfy p x.
The sequence xs must be finite.
val exists : ('a -> bool) -> 'a t -> boolexists xs p determines whether at least one element x
of the sequence xs satisfies p x.
The sequence xs must be finite.
val find : ('a -> bool) -> 'a t -> 'a optionfind p xs returns Some x, where x is the first element of the
sequence xs that satisfies p x, if there is such an element.
It returns None if there is no such element.
The sequence xs must be finite.
val find_map : ('a -> 'b option) -> 'a t -> 'b optionfind_map f xs returns Some y, where x is the first element of the
sequence xs such that f x = Some _, if there is such an element,
and where y is defined by f x = Some y.
It returns None if there is no such element.
The sequence xs must be finite.
val iter2 : ('a -> 'b -> unit) -> 'a t -> 'b t -> unititer2 f xs ys invokes f x y successively for every pair (x, y) of
elements drawn synchronously from the sequences xs and ys.
If the sequences xs and ys have different lengths, then
iteration stops as soon as one sequence is exhausted;
the excess elements in the other sequence are ignored.
Iteration terminates only if at least one of the sequences
xs and ys is finite.
iter2 f xs ys is equivalent to
iter (fun (x, y) -> f x y) (zip xs ys).
val fold_left2 : ('a -> 'b -> 'c -> 'a) -> 'a -> 'b t -> 'c t -> 'afold_left2 f _ xs ys invokes f _ x y successively
for every pair (x, y) of elements drawn synchronously
from the sequences xs and ys.
An accumulator of type 'a is threaded through the calls to f.
If the sequences xs and ys have different lengths, then
iteration stops as soon as one sequence is exhausted;
the excess elements in the other sequence are ignored.
Iteration terminates only if at least one of the sequences
xs and ys is finite.
fold_left2 f accu xs ys is equivalent to
fold_left (fun accu (x, y) -> f accu x y) (zip xs ys).
val for_all2 : ('a -> 'b -> bool) -> 'a t -> 'b t -> boolfor_all2 p xs ys determines whether all pairs (x, y) of elements
drawn synchronously from the sequences xs and ys satisfy p x y.
If the sequences xs and ys have different lengths, then
iteration stops as soon as one sequence is exhausted;
the excess elements in the other sequence are ignored.
In particular, if xs or ys is empty, then
for_all2 p xs ys is true. This is where
for_all2 and equal differ: equal eq xs ys can
be true only if xs and ys have the same length.
At least one of the sequences xs and ys must be finite.
for_all2 p xs ys is equivalent to for_all (fun b -> b) (map2 p xs ys).
val exists2 : ('a -> 'b -> bool) -> 'a t -> 'b t -> boolexists2 p xs ys determines whether some pair (x, y) of elements
drawn synchronously from the sequences xs and ys satisfies p x y.
If the sequences xs and ys have different lengths, then
iteration must stop as soon as one sequence is exhausted;
the excess elements in the other sequence are ignored.
At least one of the sequences xs and ys must be finite.
exists2 p xs ys is equivalent to exists (fun b -> b) (map2 p xs ys).
val equal : ('a -> 'b -> bool) -> 'a t -> 'b t -> boolProvided the function eq defines an equality on elements,
equal eq xs ys determines whether the sequences xs and ys
are pointwise equal.
At least one of the sequences xs and ys must be finite.
val compare : ('a -> 'b -> int) -> 'a t -> 'b t -> intProvided the function cmp defines a preorder on elements,
compare cmp xs ys compares the sequences xs and ys
according to the lexicographic preorder.
For more details on comparison functions, see Array.sort.
At least one of the sequences xs and ys must be finite.
The functions in this section are lazy: that is, they return sequences whose elements are computed only when demanded.
val empty : 'a tempty is the empty sequence.
It has no elements. Its length is 0.
val return : 'a -> 'a treturn x is the sequence whose sole element is x.
Its length is 1.
val cons : 'a -> 'a t -> 'a tcons x xs is the sequence that begins with the element x,
followed with the sequence xs.
Writing cons (f()) xs causes the function call f()
to take place immediately. For this call to be delayed until the
sequence is queried, one must instead write
(fun () -> Cons(f(), xs)).
val init : int -> (int -> 'a) -> 'a tinit n f is the sequence f 0; f 1; ...; f (n-1).
n must be nonnegative.
If desired, the infinite sequence f 0; f 1; ...
can be defined as map f (ints 0).
Invalid_argument if n is negative.val unfold : ('b -> ('a * 'b) option) -> 'b -> 'a tunfold constructs a sequence
out of a step function and an initial state.
If f u is None then
unfold f u is the empty sequence.
If f u is Some (x, u') then
unfold f u is the nonempty sequence cons x (unfold f u').
For example, unfold (function [] -> None | h :: t -> Some (h, t)) l
is equivalent to List.to_seq l.
val repeat : 'a -> 'a trepeat x is the infinite sequence
where the element x is repeated indefinitely.
repeat x is equivalent to cycle (return x).
val forever : (unit -> 'a) -> 'a tforever f is an infinite sequence where every element is produced
(on demand) by the function call f().
For instance,
forever Random.bool is an infinite sequence of random bits.
forever f is equivalent to map f (repeat ()).
val cycle : 'a t -> 'a tcycle xs is the infinite sequence that consists of an infinite
number of repetitions of the sequence xs.
If xs is an empty sequence,
then cycle xs is empty as well.
Consuming (a prefix of) the sequence cycle xs once
can cause the sequence xs to be consumed more than once.
Therefore, xs must be persistent.
val iterate : ('a -> 'a) -> 'a -> 'a titerate f x is the infinite sequence whose elements are
x, f x, f (f x), and so on.
In other words, it is the orbit of the function f,
starting at x.
The functions in this section are lazy: that is, they return sequences whose elements are computed only when demanded.
val map : ('a -> 'b) -> 'a t -> 'b tmap f xs is the image of the sequence xs through the
transformation f.
If xs is the sequence x0; x1; ... then
map f xs is the sequence f x0; f x1; ....
val mapi : (int -> 'a -> 'b) -> 'a t -> 'b tmapi is analogous to map, but applies the function f to
an index and an element.
mapi f xs is equivalent to map2 f (ints 0) xs.
val filter : ('a -> bool) -> 'a t -> 'a tfilter p xs is the sequence of the elements x of xs
that satisfy p x.
In other words, filter p xs is the sequence xs,
deprived of the elements x such that p x is false.
val filter_map : ('a -> 'b option) -> 'a t -> 'b tfilter_map f xs is the sequence of the elements y such that
f x = Some y, where x ranges over xs.
filter_map f xs is equivalent to
map Option.get (filter Option.is_some (map f xs)).
val scan : ('b -> 'a -> 'b) -> 'b -> 'a t -> 'b tIf xs is a sequence [x0; x1; x2; ...], then
scan f a0 xs is a sequence of accumulators
[a0; a1; a2; ...]
where a1 is f a0 x0, a2 is f a1 x1, and so on.
Thus, scan f a0 xs is conceptually related to
fold_left f a0 xs. However, instead of performing an
eager iteration and immediately returning the final accumulator,
it returns a sequence of accumulators.
For instance, scan (+) 0 transforms a sequence of integers
into the sequence of its partial sums.
If xs has length n
then scan f a0 xs has length n+1.
val take : int -> 'a t -> 'a ttake n xs is the sequence of the first n elements of xs.
If xs has fewer than n elements,
then take n xs is equivalent to xs.
n must be nonnegative.
Invalid_argument if n is negative.val drop : int -> 'a t -> 'a tdrop n xs is the sequence xs, deprived of its first n elements.
If xs has fewer than n elements,
then drop n xs is empty.
n must be nonnegative.
drop is lazy: the first n+1 elements of the sequence xs
are demanded only when the first element of drop n xs is
demanded. For this reason, drop 1 xs is not equivalent
to tail xs, which queries xs immediately.
Invalid_argument if n is negative.val take_while : ('a -> bool) -> 'a t -> 'a ttake_while p xs is the longest prefix of the sequence xs
where every element x satisfies p x.
val drop_while : ('a -> bool) -> 'a t -> 'a tdrop_while p xs is the sequence xs, deprived of the prefix
take_while p xs.
val group : ('a -> 'a -> bool) -> 'a t -> 'a t tProvided the function eq defines an equality on elements,
group eq xs is the sequence of the maximal runs
of adjacent duplicate elements of the sequence xs.
Every element of group eq xs is a nonempty sequence of equal elements.
The concatenation concat (group eq xs) is equal to xs.
Consuming group eq xs, and consuming the sequences that it contains,
can cause xs to be consumed more than once. Therefore, xs must be
persistent.
val memoize : 'a t -> 'a tThe sequence memoize xs has the same elements as the sequence xs.
Regardless of whether xs is ephemeral or persistent,
memoize xs is persistent: even if it is queried several times,
xs is queried at most once.
The construction of the sequence memoize xs internally relies on
suspensions provided by the module Lazy. These suspensions are
not thread-safe. Therefore, the sequence memoize xs
must not be queried by multiple threads concurrently.
exception Forced_twice
This exception is raised when a sequence returned by Seq.once
(or a suffix of it) is queried more than once.
val once : 'a t -> 'a tThe sequence once xs has the same elements as the sequence xs.
Regardless of whether xs is ephemeral or persistent,
once xs is an ephemeral sequence: it can be queried at most once.
If it (or a suffix of it) is queried more than once, then the exception
Forced_twice is raised. This can be useful, while debugging or testing,
to ensure that a sequence is consumed at most once.
Forced_twice if once xs, or a suffix of it,
is queried more than once.val transpose : 'a t t -> 'a t tIf xss is a matrix (a sequence of rows), then transpose xss is
the sequence of the columns of the matrix xss.
The rows of the matrix xss are not required to have the same length.
The matrix xss is not required to be finite (in either direction).
The matrix xss must be persistent.
val append : 'a t -> 'a t -> 'a tappend xs ys is the concatenation of the sequences xs and ys.
Its elements are the elements of xs, followed by the elements of ys.
val concat : 'a t t -> 'a tIf xss is a sequence of sequences,
then concat xss is its concatenation.
If xss is the sequence xs0; xs1; ... then
concat xss is the sequence xs0 @ xs1 @ ....
val flat_map : ('a -> 'b t) -> 'a t -> 'b tflat_map f xs is equivalent to concat (map f xs).
val concat_map : ('a -> 'b t) -> 'a t -> 'b tconcat_map f xs is equivalent to concat (map f xs).
concat_map is an alias for flat_map.
val zip : 'a t -> 'b t -> ('a * 'b) tzip xs ys is the sequence of pairs (x, y)
drawn synchronously from the sequences xs and ys.
If the sequences xs and ys have different lengths, then
the sequence ends as soon as one sequence is exhausted;
the excess elements in the other sequence are ignored.
zip xs ys is equivalent to map2 (fun a b -> (a, b)) xs ys.
val map2 : ('a -> 'b -> 'c) -> 'a t -> 'b t -> 'c tmap2 f xs ys is the sequence of the elements f x y,
where the pairs (x, y) are drawn synchronously from the
sequences xs and ys.
If the sequences xs and ys have different lengths, then
the sequence ends as soon as one sequence is exhausted;
the excess elements in the other sequence are ignored.
map2 f xs ys is equivalent to map (fun (x, y) -> f x y) (zip xs ys).
val interleave : 'a t -> 'a t -> 'a tinterleave xs ys is the sequence that begins with the first element of
xs, continues with the first element of ys, and so on.
When one of the sequences xs and ys is exhausted,
interleave xs ys continues with the rest of the other sequence.
val sorted_merge : ('a -> 'a -> int) -> 'a t -> 'a t -> 'a tIf the sequences xs and ys are sorted according to the total preorder
cmp, then sorted_merge cmp xs ys is the sorted sequence obtained by
merging the sequences xs and ys.
For more details on comparison functions, see Array.sort.
val product : 'a t -> 'b t -> ('a * 'b) tproduct xs ys is the Cartesian product of the sequences xs and ys.
For every element x of xs and for every element y of ys,
the pair (x, y) appears once as an element of product xs ys.
The order in which the pairs appear is unspecified.
The sequences xs and ys are not required to be finite.
The sequences xs and ys must be persistent.
val map_product : ('a -> 'b -> 'c) -> 'a t -> 'b t -> 'c tThe sequence map_product f xs ys is the image through f
of the Cartesian product of the sequences xs and ys.
For every element x of xs and for every element y of ys,
the element f x y appears once as an element of map_product f xs ys.
The order in which these elements appear is unspecified.
The sequences xs and ys are not required to be finite.
The sequences xs and ys must be persistent.
map_product f xs ys is equivalent to
map (fun (x, y) -> f x y) (product xs ys).
val unzip : ('a * 'b) t -> 'a t * 'b tunzip transforms a sequence of pairs into a pair of sequences.
unzip xs is equivalent to (map fst xs, map snd xs).
Querying either of the sequences returned by unzip xs
causes xs to be queried.
Therefore, querying both of them
causes xs to be queried twice.
Thus, xs must be persistent and cheap.
If that is not the case, use unzip (memoize xs).
val split : ('a * 'b) t -> 'a t * 'b tsplit is an alias for unzip.
val partition_map : ('a -> ('b, 'c) Either.t) -> 'a t -> 'b t * 'c tpartition_map f xs returns a pair of sequences (ys, zs), where:
ys is the sequence of the elements y such that
f x = Left y, where x ranges over xs;zs is the sequence of the elements z such that
f x = Right z, where x ranges over xs.partition_map f xs is equivalent to a pair of
filter_map Either.find_left (map f xs) and
filter_map Either.find_right (map f xs).
Querying either of the sequences returned by partition_map f xs
causes xs to be queried.
Therefore, querying both of them
causes xs to be queried twice.
Thus, xs must be persistent and cheap.
If that is not the case, use partition_map f (memoize xs).
val partition : ('a -> bool) -> 'a t -> 'a t * 'a tpartition p xs returns a pair of the subsequence of the elements
of xs that satisfy p and the subsequence of the elements of
xs that do not satisfy p.
partition p xs is equivalent to
filter p xs, filter (fun x -> not (p x)) xs.
Consuming both of the sequences returned by partition p xs causes
xs to be consumed twice and causes the function f to be applied
twice to each element of the list.
Therefore, f should be pure and cheap.
Furthermore, xs should be persistent and cheap.
If that is not the case, use partition p (memoize xs).
A dispenser is a representation of a sequence as a function of type
unit -> 'a option. Every time this function is invoked, it returns
the next element of the sequence. When there are no more elements,
it returns None. A dispenser has mutable internal state, therefore
is ephemeral: the sequence that it represents can be consumed at most
once.
val of_dispenser : (unit -> 'a option) -> 'a tof_dispenser it is the sequence of the elements produced by the
dispenser it. It is an ephemeral sequence: it can be consumed at most
once. If a persistent sequence is needed, use
memoize (of_dispenser it).
val to_dispenser : 'a t -> unit -> 'a optionto_dispenser xs is a fresh dispenser on the sequence xs.
This dispenser has mutable internal state, which is not protected by a lock; so, it must not be used by several threads concurrently.
val ints : int -> int tints i is the infinite sequence of the integers beginning at i and
counting up.